Parts For Sale
Updated May 2, 2008
![]()
Please send email regarding any of these parts to:
![]()
Shipping will be actual UPS cost. Weights are shown for most items.
UPS quick cost can quote the shipping cost from my zip code (53154) to yours.
Priority for multiple parties interested in the same item will be based upon which email was sent first.
Oops, I'm not lookin' for used stuff ! Take me back to the Monte Carlo SS page.
A big 'Thank You' to those folks which have already bought parts!
![]()
GM torque converter for 200-4R.
This is the original converter for my 85 SS 200-4R trans. It was rebuilt in 2005 which also included upgrading to brazed fins. The GM stall rating for this unit is 2048 rpm, and is one of their higher stall stock converters. It has lockup which works just fine. I believe it also fits early (1982, 83, early 84) 700-R4 transmissions with a 27 spline input shaft.
$150 (42 lbs)

![]()
Edelbrock carburetor (p/n 1406)
600 cfm with electric choke. This came off of a friends car. It's nice and clean and was running just fine. Stock jetting.
I'll throw in the pint sized air cleaner in the last pic for free.
$125 (10 lbs)


![]()
Comp Cams XE274 Extreme Energy camshaft.
274/286 @ .006 230/236 @ .050 .487"/.490" 110 LS
About 10K miles on it, plenty of life left in it. Fits Gen 1 small block chevy.
$60 (9 lbs)

![]()
GM 8" external balance balancer (damper)
Fits 400 (and 383) Gen 1 sbc external balance crankshafts.
$30 (10 lbs)

![]()
GM Monte SS stock after cat y-pipe
This is what's left of the stock y-pipe from my 85 SS. I cut it off just in front of the mufflers. I thought it might be of use to someone that wanted the Y section and fab their own exhaust after that. It has some surface rust, but the Y section, converter flange and pipes are solid.
$20 (10 lbs)

![]()
Edelbrock valve covers (p/n 4449)
These are in fair shape, they have a little rust along the flanges as you can see. That was pretty much where the hold down tabs I used were located. Using tabs (which is recommended) would cover most of it. Includes grommets for PCV and breather.
$15 (5 lbs)


![]()
Summit oil pan (p/n G3500)
Installed, but never used (doesn't clear Edelbrock TES crossover pipe). Fits Gen 1 sbc, driver side dipstick, 2 piece rear main seal.
$15 (8 lbs)

![]()
Chrome differential cover
Fits GM 7.5" & 7.625" 10 bolt rear ends.
$10 (3 lbs)

![]()
Turbo 400 dipstick, tube and dust shield. SOLD April 2008 Thanks Glenn!
Auburn Pro posi carrier. SOLD April 2008 Thanks Doug!
Edelbrock air cleaner housing. SOLD April 2008 Thanks Greg!
TRW forged pistons for a 406. SOLD November 2003 Thanks Gary!
Crane PowerMax cam and lifters. SOLD February 2003 Thanks Nick!
GM "441" Cylinder heads. SOLD September 2001 Thanks Rich!
TH350/400 torque converter. SOLD September 2001 Thanks Rich!
Crane roller tip rocker arms and poly-locks. SOLD April 2001 Thanks Ed!
Wolf nose bra for Monte Carlo SS. SOLD September 2000 Thanks Chris!
Grant Challenger Steering Wheel. SOLD August 2000 Thanks Mark!
Thank you to the
gearheads which have stopped in!!